dual CF to 44pin male IDE adapter
Name:  dual CF to 44pin male IDE adapter
Model:  STCI4403


STCI4403 44PIN MALE DUAL CF To IDE(IDE-CF) Adapter is an adapter for connecting a compact flash memory card to a 2.5''  host interface, aiming at educational sectors, IT development, and the embedded technology enthusiast to enable the use of a compact flash card as an IDE hard drive.As a result, any equipment, such as Notebook computer, that uses a 2.5" IDE hard drive can be easily converted to use the low power and shock resistant CF media.Once installed, the CF appears as an ordinary hard drive to any OS and can be configured as a boot device. The Dual CF-IDE Hard Drive Adapter contains a second CF slot for the slave position of the IDE channel, allowing increased storage capacity with the same low power consumption and solid state benefits of the CF card.

Specification & Features

Support dual CF .
Very helpful for embedded system designers and engineers
No driver required
Master / Slave mode selection
male , 44-pin IDE connector .
You can boot from Dos/Windows/Linux with CF, same as IDE hard drives, but much faster Master/Slave jumper ,with DMA MODE,support CFI/CFII cards
Power input: don't need extra power supply.





Interface: mini 44-pin IDE male (2.5" IDE hard drive connector)
Supported media Type I/II CF and MicroDrive
Maximum Read / Write Speed: Depends on the media
OS Support: DOS, Windows 3.1, NT, 98SE, Me, 2000, XP, Vista, Mac OS 8.6 or higher, Linux
Dimensions: (W x D x H) - 45 x 10 x 52 mm
Power: --
Storage Temperature: -20 °C to + 60 °C
Storage Humidity: 5 - 90%

Chat live 
Contact us
Send mail