CF to 40pin male IDE adapter
Name:  CF to 40pin male IDE adapter
Model:  STCI4001
Detail:

STCI4001 CF to 40pin male IDE adapter

 

STCI4001 40PIN MALE CF SLOT CF To IDE(IDE-CF) Adapter is an adapter for connecting a compact flash memory card to a 3.5''  host interface, aiming at educational sectors, IT development, and the embedded technology enthusiast to enable the use of a compact flash card as an IDE hard drive.Designed throught IDE cable into the IDE port of any processor board, the small form factor of this adapter can be easily mounted inside any system.

Specification & Features
>
Support single CF in this adapter
>
Very helpful for embedded system designers and engineers
>
No driver required
>
Master / Slave mode selection
>
Male , 40-pin IDE connector with 4-pin power connector on-board
>
You can boot from Dos/Windows/Linux with CF, same as IDE hard drives, but much faster Master/Slave jumper ,with DMA MODE,support CFI/CFII cards
>
Power input: +5V, floppy disk Drive power connector

DATASHEET:

 

Interface: 40-pin IDE 3.5"
Supported media Type I/II CF and MicroDrive
Maximum Read / Write Speed: Depends on the media
OS Support: DOS, Windows 3.1, NT, 98SE, Me, 2000, XP, Vista, Mac OS 8.6 or higher, Linux
Dimensions: (W x D x H) - 44 x 12 x 61 mm for 40-pin IDE with CF card attached
Power: +5V from PC power supply
Storage Temperature: -20 °C to + 60 °C
Storage Humidity: 5 - 90%
 

Chat live 
Contact us
Send mail